Radon Testing Hoover AL
Radon Testing in Hoover, AL — Independent & Lab-Read
The short version: Radon testing in Hoover, AL — $295 flat, a sealed 48-hour monitor, a certified lab report usually back about an hour after pickup. Hoover is one city that sits in two of Alabama's highest-potential radon counties (Jefferson on the north side, Shelby on the south), and we cover both sides of the line. We don't sell or install mitigation systems, which means nothing about your number is good or bad for our business either way.
ADPH names Jefferson and Shelby among Alabama's 15 highest-potential radon counties. Hoover sits in both.
$295
flat rate, every time
48hrs
minimum test duration
The Process
Your 48 Hours
Two short visits and one quiet, uninterrupted test in between.
We place the sealed monitor
About 15 minutes.
It runs for 48 quiet hours
You live normally — keep windows closed, HVAC is fine.
We pick it up
Another 15 minutes.
An independent lab reads the data
Your report lands by email, usually within about an hour of upload.
One City, Two Counties
Why Hoover Sits in the Middle of This
Hoover's city limits cross the Jefferson-Shelby county line. On CDC's measured 2008-2017 data, about 10.7% of the ~630 tests reported in Jefferson County came back at or above the EPA action level of 4 pCi/L, with the county averaging 1.9. Shelby County, on the other side of the line, averaged almost the same — 1.9 pCi/L — with 11.3% of ~283 tests at or above 4. Roughly 1 in 9 tests either way.
10.7%
Jefferson tests ≥ 4 pCi/L (CDC 2008-2017, n≈630)
11.3%
Shelby tests ≥ 4 pCi/L (CDC 2008-2017, n≈283)
There's no ZIP-code cutoff for radon inside Hoover. Bluff Park (35226) and Trace Crossings (35244) sit above Shades Valley on the Jefferson side; Riverchase (35244), Greystone (35242), and the Highway 280 corridor stretch into Shelby. The county line doesn't change the ground under your house — it just changes which county your test result gets counted in.
Your Result
What Your Number Means
Every report lands in one of three zones, measured against the EPA action level.
U.S. average indoor level is about 1.3 pCi/L (per EPA/ADPH).
Below 2.0 pCi/L
No action needed
No action needed.
2.0–3.9 pCi/L
EPA suggests considering fixes
EPA suggests considering fixes; retesting is reasonable.
4.0+ pCi/L
EPA action level
EPA action level — mitigation recommended, retest after.
Coverage
Where We Test in Hoover
We cover Hoover addresses on both the Jefferson and Shelby sides, plus the neighbors sharing Hoover's ZIP grid.
Counties
- Jefferson County
- Shelby County
ZIP codes served
- 35022
- 35080
- 35124
- 35142
- 35216
- 35226
- 35236
- 35242
- 35244
Adjacent cities we routinely test alongside Hoover jobs: Hoover, Vestavia Hills, Pelham, Helena, Alabaster, Homewood, Bluff Park (Hoover).
Why Independent
Why an Independent Radon Tester in Hoover
We only test. No mitigation systems, no inspection bundle, no upsell if your number comes back high. In a market where most radon services are a side line to something else the company sells — a home inspection, a mitigation install, an HVAC job — testing is our whole job. Nothing about your result is good or bad for us.
Every Hoover test runs on a sealed, lab-read monitor: we place it, an independent lab reads it, and we never grade our own test. That separation is what makes the report something a buyer, seller, and both agents can trust at the same time.
Buying or Selling in Hoover
Hoover Home Sales and the 10-Day Window
Most Alabama purchase contracts give the buyer about ten days to inspect the home and negotiate repairs. Radon has to fit inside that window: a 48-hour test, pickup, and a lab report — which is the exact rhythm we schedule around. Nights and weekends work for placement or pickup, so a call on Monday morning usually has the report in hand before your inspection window closes.
Agents working Hoover, Riverchase, Bluff Park, or the Highway 280 corridor — see our page built for agents for scheduling and report-delivery. For the step-by-step, see how radon testing works, or what a radon test costs in the metro. For the wider metro picture see radon testing in Birmingham, and to look up your ZIP's ADPH average see Alabama radon levels by ZIP code.
Get Tested
Schedule independent radon testing in Hoover, AL.
FAQ
Frequently Asked Questions
Which county is my Hoover home actually in — Jefferson or Shelby?
Hoover sits in both. The city limits cross the Jefferson-Shelby county line, so a Hoover address on the north side (Bluff Park, Riverchase) is usually Jefferson County, while parts of Trace Crossings, Ross Bridge, and the Highway 280/Greystone edge are typically Shelby. Either way, both counties are on ADPH's list of Alabama's 15 highest-radon-potential counties — so the case for testing is the same wherever you sit.
Does the county line change the test or the price?
No. Every test is $295 flat regardless of which side of the county line the house sits on. Same 48-hour standard, same sealed monitor, same independent lab for every Hoover job.
Do you cover the Highway 280 corridor and Greystone?
Yes. That corridor — including 35242 and the Chelsea side of Hoover — is regular service area for us. We also cover Riverchase (35244), Bluff Park and Rocky Ridge (35226), Trace Crossings, and the Ross Bridge/Hoover-Bessemer edge (35022).
How fast can you get a monitor placed in Hoover?
Same-day or next-day is normal for Hoover — we're based in Leeds, so the run over is short. Nights and weekends work for scheduling. The test itself runs 48 hours once the monitor is placed, and the lab report usually lands about an hour after pickup.